Material Managing Energy UNIT one
Common Description
This energy unit is developed for the fork lift industry, consisting of very effective gear pump, DC motor, guide increase and reduced valve, tank, ect. The up and down motion are managed through the lever from the manual release valve, that’s outfitted with an electrical switch to activate the motor. The lowing pace is controlled from the strain compensated movement handle valve.
Special Notes
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned just before installation of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities, N46 hydraulic oil is advised .
4. Oil modifying is required just after the preliminary 100 operation hrs, afterwards after each and every 3000 hrs.
five. The energy unit proven is built to be mounted horizontally.

Materials Handling Power UNIT 2
General Description
This energy unit capabilities energy up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve together with the lowering pace controlled through the pressure compensated movement handle valve. Goods of this series could be extensively used in the sector of logistic devices for example fork lift, mini lift table, and so forth.
Particular Notes
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic components concerned prior to mounting the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities, N46 hydraulic oil is suggested .
4. Oil modifying is needed after the original one hundred operation hrs,afterwards as soon as each 3000 hrs.
five. The electrical power unit ought to be mounted horizontally.